Ember Bee Isopod — Fact Sheet
Merulanella sp. “Ember Bee” · Ember Bee Isopod
📋 At a glance
| Adult size | 1.8–2.2 cm (captive estimate) |
| Lifespan | 1.5–3 years (captive planning range) |
| Activity | Nocturnal |
| Difficulty | Advanced |
| Legal | CITES and EU Annexes: not listed (checked 2026-08-23); collection, import and transport rules still apply |
🏠 Enclosure
A sealed but cross-ventilated 30 × 20 × 20 cm box is a practical minimum for a starter colony. Use fine metal mesh or holes too small for mancae, and keep ventilation on opposing sides rather than only in the lid. Provide a deep moisture buffer at one end, a merely moist middle, and a less-wet end; none of the substrate should become dusty dry.
🪨 Substrate and furnishings
Use 6-8 cm of pesticide-free deciduous leaf mould, rotten hardwood, and mineral soil, with coir only as a minor moisture-holding component. Cover most of the surface with several layers of dry and partly decayed oak, beech, maple, or similar hardwood leaves. Stand cork flats and branching wood securely so animals can climb and find airier retreats.
Keep one patch of sphagnum at the hydrated end and a permanent piece of cuttlebone or clean calcium carbonate. Avoid conifer litter, aromatic wood, fertilizer, pesticide residues, charcoal briquettes, and substrate built mainly from nutritionally empty coir.
💡 Lighting
UVB is not required. Give 10-12 hours of diffuse room or plant light and ample shade under bark and litter. Direct sun and high-output lamps can overheat a small tub within minutes. Low evening light is best for observation.
🌡️ Temperature
Keep most of the colony at 20-25 °C, with a retreat around 18-21 °C. Avoid sustained temperatures over 26 °C. If a cold room requires heat, warm one outer side under thermostat control; never heat the base, which removes the animals’ ability to retreat into cooler substrate.
Published species-specific thermal limits do not exist. These values are a conservative overlap of detailed specialist culture practice, not a wild climate reconstruction. Heat-related losses can resemble a humidity problem because warm substrate dries quickly and oxygen availability falls in waterlogged pockets.
💧 Humidity and water
Maintain humid air, roughly 65-80%, while preserving airflow and a visible substrate gradient. Pour a small amount of dechlorinated water into moss and substrate at one end; do not spray the entire box on a fixed schedule. The dry-side surface may lose its sheen, but deeper material should retain slight moisture.
No water dish is needed. Standing water drowns mancae, and constant condensation signals insufficient ventilation. Crowding at the wet end suggests dehydration; persistent surface activity at the vents, sour substrate, or repeated deaths after molts suggests excessive wetness or heat.
🪳 Feeding
Decaying hardwood leaves and soft white-rotted wood are the staple, not decoration. Supplement two or three times weekly with tiny portions of mushroom, carrot, squash, sweet potato, or a balanced isopod food. Offer a small protein portion such as dried gammarus, shrimp, or quality fish food about weekly, especially in a growing colony.
Keep calcium continuously available. Remove moist supplements before mold spreads, usually within 24 hours in warm conditions. If food remains untouched, reduce the portion rather than adding more varieties on top of it.
🩺 Health — warning signs
- Sudden losses in summer: check the warmest substrate, not only room temperature; improve safe airflow and move the enclosure away from sun.
- Failed molts: restore the moist retreat, calcium access, and rotten leaf/wood diet without saturating the whole box.
- Mold and sour odor: remove surplus food, increase cross-flow, and replace only the fouled portion so the colony retains its microbial substrate.
- Mancae disappearing: inspect vent size, damp refuge stability, and competing springtail or mite populations.
- Line confusion: keep labels and tools separate and never sell offspring under a species name that has not been demonstrated.